Home Forums Daily Logs Daily Logs of TristanF

  • Daily Logs of TristanF

    Posted by Tristan on August 22, 2022 at 1:34 pm

    I completed 4 GCN courses and watched all six videos in the first folder named ” All about comptia A”. The GCN slides were strenuous but they are finished.

    (08-19-22)

    • This discussion was modified 3 months, 2 weeks ago by  Tristan.
    Tristan replied 3 days, 14 hours ago 1 Member · 37 Replies
  • 37 Replies
  • Tristan

    Member
    August 22, 2022 at 4:15 pm

    Today I completed folders two and three, and started folder four. I managed to get to video number fourteen which was over CPU speeds and cores. I learned a good number of different things and tried to use testing myself as a form of retention.

  • Tristan

    Member
    August 23, 2022 at 4:16 pm

    Today I finished folder four videos and now await the test for those four folders. Learned some server stuff.

  • Tristan

    Member
    August 24, 2022 at 4:00 pm

    Today I helped clean the back room and it seemed as if it was very much needed, though it still needs more it is a start. I also read about twenty pages of a book called the VIII while waiting.

  • Tristan

    Member
    August 25, 2022 at 4:13 pm

    Today I accomplished finishing file zero trough two. I used my personal laptop for the Ubuntu download and the virtual box. Then I set it up how that guy said to in the vids( I had to go back a few times). Then again I await the next mission.

  • Tristan

    Member
    August 26, 2022 at 4:12 pm

    Today I helped set up the virtual machine for the render farm. I set up ubuntu on the machine and that was mostly it. I have already installed it before so it was relatively easy.

  • Tristan

    Member
    August 29, 2022 at 4:13 pm

    Today I helped again set up some of the server for the render farm conversion. I will clone Node 2 twice to make node 3 and 4 tomorrow.

    • This reply was modified 3 months, 1 week ago by  Tristan.
  • Tristan

    Member
    August 30, 2022 at 4:03 pm

    Today I watched the first two videos in the book chapter four, which were over ram. I now understand that ram can vary in multiple areas such as in the types of ram, amount of storage, the channels and where which type of ram goes in which channel. I also downloaded Malwarebytes on both of my thumb drives just to have that if needed at anytime.

  • Tristan

    Member
    September 1, 2022 at 4:16 pm

    Yesterday I created my first ever cable and learned the type b of formation up. Today I helped make a few RJ45 cables and messed with a router.

  • Tristan

    Member
    September 2, 2022 at 4:14 pm

    Today I helped clean the back room and take off a screen and take out the hard-drive in a Mac all-in-one. We installed a graphics card and checked the display.

  • Tristan

    Member
    September 6, 2022 at 4:15 pm

    Today I Finished up chapter four, five, and six. Firstly chapter four was over ram and some of its facets. Then chapter five was over firmware, or basically UEFI BIOS, BIOS, POST, and how to navigate thought the BIOS settings. Finally chapter six was over the motherboard and how the market is regulated to around four sizes. Chapter six also covered chipsets and how to install a motherboard.

  • Tristan

    Member
    September 7, 2022 at 4:15 pm

    Today we replaced the hard drive in a laptop and took one out of a tower too.

  • Tristan

    Member
    September 8, 2022 at 3:59 pm

    Today we put the screens back on the two apple all-in-ones and setup some pc towers. We put windows on them and they seemed to start easily. I put Kali Linux on one of my USBs and it seems to still be working. The thing about it is you have to turn off secure boot which can be okay or bad.

  • Tristan

    Member
    September 9, 2022 at 4:29 pm

    Today I helped take off a screen from another apple all-in-one. We also moved the break room stuff into the second room down that hallway. In place of where the old break room was we are making a room for us computer support cats.

  • Tristan

    Member
    September 12, 2022 at 4:09 pm

    Today we all took a safety test and I might have missed one on accident but I assume we are going to get to be able to take it again. I’ve taken some safety tests before for tec-ed. I have taken test for most of the woodcutting machines that are in a woodshop, and I slightly believe I still am able to use them correctly and safely. I also vacuumed the entire backroom, I propose that dead crickets are no longer available in the back room. I also did organize some chords in the backroom but that would be the majority of today.

  • Tristan

    Member
    September 13, 2022 at 4:12 pm

    Today I glued a mac screen back on and but the macs where they belong. Also it is coming along swimmingly.

Page 1 of 3